Diesel Generator Controller, Automatic Mains Failure recovery

The Diesel Generator Controller 2000 is a 3rd generation microprocessor based generator controller designed for most types of diesel generators systems in fully automatic mode and via remote or manual start/stop commands.

The DGC 2000 scans sixteen discrete sensors and true RMS measurements of the mains and generator three-phase voltages and load currents. Incorporating analogue inputs from engine temperature, oil pressure, coolant and fuel levels into its advanced protective algorithm while continuously performing self-status tests and measuring its own battery supply voltage.

Diesel Generator Controller Functions

In addition, it calculates generator active and reactive power, power factor, mains and generator frequency (can use three sources to measure generator frequency: voltage inputs, magnetic pick-up and alternator).

The Diesel Generator Controller 2000 incorporates 26 different trips, faults and alarms which may be individually enabled or disabled, thus, providing flexible adjustment of its settings. Auto reset feature allows resetting of the trips, faults or alarms after user preset time. Most of the described protection contains level and time delay adjustment, manually or through the RS 232/ RS 485 serial link.

A Liquid Crystal Display (LCD), together with a Keypad and LED's enables user-friendly interface, accurate digital parameters setting, actual parameters reading, and detailed trip and alarm messages display.